How to Manage and Delete Wireless Network Profiles in Windows 8.1

My tablet kept having trouble connecting to different wireless networks that used the same SSID. The fix was managing the saved Wi-Fi profiles directly. Here’s how to view, change, and delete wireless network profiles in Windows 8.1 and Windows RT 8.1.

Change a Wireless Profile in PC Settings

  1. Swipe in from the right edge of the screen (or point to the upper-right corner with a mouse), tap Settings, then Change PC settings.
  2. Go to Network → Connections and choose the connection you want to change.
  3. Make your changes on the page that appears.

Manage Wi-Fi Profiles with netsh

Some tasks, like deleting a profile, have to be done from the Command Prompt. Search for “Command Prompt” from the Start screen, open it, and use these commands:

Show all wireless profiles on the PC:

netsh wlan show profiles

Delete a profile:

netsh wlan delete profile name="ProfileName"

Show a saved Wi-Fi password (security key):

netsh wlan show profile name="ProfileName" key=clear

Stop automatically connecting to a network that’s out of range:

netsh wlan set profileparameter name="ProfileName" connectionmode=manual

To move a network up the priority list, connect to it and choose Connect automatically; it goes to the top. To stop auto-connecting to a network that’s in range, select it in the network list and click Disconnect.

How Windows Chooses Which Network to Use

Windows usually prefers connections in this order: Ethernet, then Wi-Fi, then mobile broadband. Each new Wi-Fi network you join is added to the list, and if you connect to a second Wi-Fi network while the first is in range, Windows will prefer the second one from then on.

Mobile broadband is treated differently because it’s usually metered. If you manually connect to mobile broadband while Wi-Fi is in range, it’s preferred only for that session. To make your PC prefer mobile broadband over a Wi-Fi network, select that Wi-Fi network and click Disconnect, and Windows won’t connect to it automatically.

How to Re-register a Windows Client or Server in WSUS

When a Windows client or server stops reporting to WSUS (Windows Server Update Services), you can usually force it to re-register with a few commands. Run them on the affected machine from an elevated Command Prompt.

Steps to Re-register with WSUS

1. Refresh Group Policy so the machine picks up the WSUS server settings:

gpupdate /force

2. Trigger update detection:

wuauclt /detectnow

3. If it still doesn’t appear, reset the authorization cookie and detect again:

wuauclt.exe /resetauthorization /detectnow

Tip: Check Event Viewer on the client to confirm the re-registration went through.

How to Enable or Disable Hibernate in Windows from an Elevated Command Prompt

Windows hibernation is controlled with the powercfg command. Turning it off frees the disk space used by hiberfil.sys; turning it on restores hibernate and hybrid sleep. Both commands need an elevated (Run as administrator) Command Prompt.

Enable Hibernate

This restores the hiberfil.sys file and brings back the “Allow hybrid sleep” and “Hibernate after” settings under Sleep in Power Options.

  1. Open an elevated Command Prompt.
  2. Type the command below and press Enter.
  3. Close the Command Prompt.
powercfg -h on

Disable Hibernate

This turns off hibernation, deletes hiberfil.sys, and removes the “Allow hybrid sleep” and “Hibernate after” settings. On Windows 8 and later it also disables Fast Startup.

  1. Open an elevated Command Prompt.
  2. Type the command below and press Enter.
  3. Close the Command Prompt.
powercfg -h off